Skip to navigation

How to do guitar stuff

I first put these pages together because I couldn't find any resources for people who wanted to build a SAGA guitar kit for the first time.

Since then I have expanded the section to cover spray finishing techniques and fitting neck kit hardware. The next section in planning is going to be a step-by-step refret when I can remember to take the photos!

Attach the neck to the guitar. I recommend inserting in the machine screws with fingers first to check that everything is aligned before tightening fully. How to fit one of my threaded neck kits.

SAGA TC-10 (Telecaster style) guitar kit How to build a SAGA TC-10 (Telecaster style) guitar kit.

sides masked ready for first coat How to build a SAGA HT-10 (PRS style) guitar kit.

How to create your own sunburst finish How to create your own sunburst finish using nitrocellulose lacquer aerosols.

I used a Stewmac Jaws fret press to insert the fretwire but you can use a wooden block and a hammer. How to refret your guitar.